Get Quotes
Home/Products/Chocolate Coating Machine
LST Chocolate Coating Machine

Chocolate Coating Machine

LST Chocolate Coating Machine uses rotating drums and high-pressure atomized spraying for chocolate or sugar coating. The 500kg and 1000kg configurations are selected according to batch scale, coating material, utilities and factory conditions.

500kg and 1000kg coating configurations
Six high-pressure coating spray groups
304 stainless-steel 4mm drum
Automated cleaning and feeding systems
Chocolate and sugar-coating processes
Factory technical consultation
Category Chocolate Processing Equipment
Application Nuts, dried fruit and small confectionery centres
Get a quote
PRODUCT OVERVIEW

Rotary tumbling with controlled atomized spraying

LST batch chocolate tempering machine

Industrial rotary coating process

The rotating drum continuously turns the product while six high-pressure spray groups atomize chocolate or coating material. A constant-temperature jacket helps maintain flow, and needle-actuated nozzles provide physical clearing support between spray cycles.

  • Coat nuts, dried fruit and small centres with chocolate or sugar layers
  • Select 500kg or 1000kg configuration from the batch plan
  • Confirm feeding, unloading and heated cleaning systems
  • Confirm power, compressed air, temperature and humidity
MAIN SPECIFICATIONS

Capacity and utility reference

ModelCapacity classVerified referenceFactory requirement
500kg configuration500kg class14kW main-machine total power30A supply and 10mm² incoming cable stated in the technical data
1000kg configuration1000kg class7.5kW main motor4kW fan and upgraded power distribution required
Spray system6 groupsHigh-pressure atomized sprayingConstant-temperature jacket and needle clearing
Compressed air0.4–0.6MPa12mm main air pipeStable, filtered air supply required

Electrical load, output assumptions and included modules must be confirmed in the final technical proposal.

PRODUCTION APPLICATION

Connect the machine to the required process

LST tempering machine production configuration

From feeding and spraying to unloading and cleaning

The coating proposal combines the drum, spray groups, feeding system, unloading mechanism and cleaning system. Chocolate coating is typically planned around 10–14°C, while sugar coating is typically planned around 15–20°C; humidity is controlled near 30% according to the knowledge base.

Discuss configuration
OUR CERTIFICATES

Compliance and technical files

LST CE certificateCE certificate
LST attestation of complianceAttestation of compliance
LST declaration of conformityDeclaration of conformity
LST food contact test reportFood-contact test report

Document applicability depends on the machine model, materials and confirmed order configuration.

FAQ

Frequently asked questions

How are the coating nozzles protected against blockage?

The spray system combines constant-temperature jacket circulation, high-pressure atomization and needle-actuated physical clearing. A cleaning cycle is required after production to remove residual material.

How should I choose between 500kg and 1000kg?

Confirm product type, coating material, target batch size, cycle plan, available power, compressed air and room conditions. The 1000kg configuration uses a larger 7.5kW main motor and 4kW fan.

What factory conditions are required?

The technical data specifies stable 0.4–0.6MPa compressed air. Chocolate coating is planned around 10–14°C and sugar coating around 15–20°C, with humidity near 30%; final conditions must be confirmed for the recipe.

What information is needed for a quotation?

Provide centre product, coating material, target batch size, hourly plan, power supply, compressed-air capacity, room temperature and humidity, cleaning requirements and installation space.

Send your product requirements

Receive a configuration discussion based on your material, process and target output.

Request a solution